Perma-Grit Contour Sanding Block Small 140 x 51mm

Small version (140mm x 51mm) of the ultra useful Perma-Grit double sided tungsten carbide contour sanding block. The abrasive faces measure 28mm Radius internal face and 30mm Radius external face. Ideal for finishing under cambers, grooves and fillets. Leading and trailing edges.

The quality of the tungsten carbide strips means that they will shape carbon fibre without the characteristic 'fraying' associated with conventional sandpaper or wet-and-dry. The abrasive will also not 'lose its edge' or fall apart meaning a sanding block can last you for years!

The faces are both fine grit, equivalent to 320 grit sandpaper. We also stock small 'standard' or 'wedge' sanding blocks.

Typical uses

Perma-Grit sanding blocks for composites are a staple tool for any composites workshop. The blocks are perfect for; finishing under cambers, grooves and fillets.

Further Information

How to Use

Hold the sanding block comfortably in one hand and gently use it to shape, bevel or smooth the piece of carbon you are working. Always work from a course grit to a fine grit before moving on to a rubbing compound and finally wax.

Unclog the abrasive strip with a fine wire brush to keep it working at its most effective. Clean with a solvent such as Acetone if necessary.

We also stock a large contour sanding block measuring 280 x 51mm, should that suit your particular project.