Need any help or advice?
+44 (0)1782 454499
Specification
General Properties
| Gross Weight | 0.035 | kg |
|---|
Shipping Information
Restrictions
This product is not classed as dangerous goods for transport and can be shipped to all destinations without restriction.
Package Size
There are no package size restrictions or surcharges for this product.
Delivery Cost
To find the delivery cost of this item to your address, add it to your basket and then use the instant shipping calculator on the basket page.
Calibrated Mixing Cup
- CALMIXCUP1300
- 5/5 Average rating
Reusable calibrated plastic mixing cups ideal for measuring and mixing resins by volume ratios.
Available to buy online in 1300ml (1.3L) and 2440ml (2.4L) sizes.
PRODUCT VERSIONS
Size
AVAILABILITY:1562 in stock available for immediate shipping
Trade discounts
| 0-9 | 10-49 | 50+ |
|---|---|---|
| €0.75 | €0.60 | €0.50 |
We won’t be beaten on price!
If you believe you’re buying an equivalent product cheaper elsewhere, contact us to discuss your requirements.
High quality Calibrated Mixing cups ideal for when you need to measure out and mix resins by volume.
These high quality cups are made from a see through plastic so you can easily check the resin level against the graduated markings. Again to make reading easier, the graduations are printed to enable reading looking into the cup and feature graduations for basic volume in ml as well as several graduation markings for various common mixing ratios. The corners of the cup are square edges to aid thorough mixing of the contents
These reusable cups, being made from Sturdy polypropylene, are non-stick to most resins, including epoxy, polyester, vinylester and Polyurethanes as well as RTV silicones. Once the resin in the cup has cured, it can be flexed and cracked out leaving the cup ready for reuse.
How to Buy
Sold individually. Please choose the cup size you require from the drop-down list at the top of the page.
Trade discounts
| 0-9 | 10-49 | 50+ |
|---|---|---|
| €0.75 | €0.60 | €0.50 |
We won’t be beaten on price!
If you believe you’re buying an equivalent product cheaper elsewhere, contact us to discuss your requirements.
High quality Calibrated Mixing cups ideal for when you need to measure out and mix resins by volume.
These high quality cups are made from a see through plastic so you can easily check the resin level against the graduated markings. Again to make reading easier, the graduations are printed to enable reading looking into the cup and feature graduations for basic volume in ml as well as several graduation markings for various common mixing ratios. The corners of the cup are square edges to aid thorough mixing of the contents
These reusable cups, being made from Sturdy polypropylene, are non-stick to most resins, including epoxy, polyester, vinylester and Polyurethanes as well as RTV silicones. Once the resin in the cup has cured, it can be flexed and cracked out leaving the cup ready for reuse.
How to Buy
Sold individually. Please choose the cup size you require from the drop-down list at the top of the page.
Specification
General Properties
| Gross Weight | 0.035 | kg |
|---|
The dimensions of the Calibrated Mixing cups are as follows:
1300ml Size
| Height (mm) | Outside Diameter (mm) | Inside Diameter (mm) |
|---|---|---|
| 140 | 130 | 113 |
2240ml Size
| Height (mm) | Outside Diameter (mm) | Inside Diameter (mm) |
|---|---|---|
| 165 | 155 | 135 |
The basic way is to wipe out leftover resin with a tissue and then clean off any residual resin with some more tissue wetted out with a solvent such as acetone or methylated spirit.
Another common way to clean the cups after use is to simply let any residual/leftover resin cure in them fully and then once it can cured it can usually be knocked out as a whole, cured piece of resin. This tends to work well for the 'second mix' pot if you're doing a 'double potting' procedure because all of the resin that's in the pot will have already been mixed and so will cure fully. It tends not to work so well for the first cup where residual resin on the sides or in the corners is often not fully mixed and so doesn't fully cure. In this case you normally need to wipe the uncured resin out with some tissue to remove it and then clean the cup with more tissue and some solvent, such as acetone or methylated spirit.
To avoid spilling resin during a thorough mixing process, it is recommended to keep the total batch size under 1000ml for the 1300ml cup size and under 1800ml for the 2240ml cup size.
ASK YOUR OWN QUESTION
Customer Product Reviews for Calibrated Mixing Cup
Very good product the measurements are very good and resists melting well.
SUBMIT YOUR OWN PRODUCT REVIEW
We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.SUBMIT YOUR OWN PRODUCT REVIEW
We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.Shipping Information
Restrictions
This product is not classed as dangerous goods for transport and can be shipped to all destinations without restriction.
Package Size
There are no package size restrictions or surcharges for this product.
Delivery Cost
To find the delivery cost of this item to your address, add it to your basket and then use the instant shipping calculator on the basket page.
RELATED PRODUCTS
CUSTOMERS ALSO PURCHASED
RELATED PRODUCTS
CUSTOMERS ALSO PURCHASED
100% SECURE
PAYMENT METHODS
Easy Composites EU B.V., registered in the Netherlands 73601195. All content copyright (C) Easy Composites Ltd, 2024. All rights reserved.