Polished Gold CULR Epoxy Pigment

Universal Pigment for Translucent Tint and Solid Opaque Colour

CULR™ pigments can be used both to create subtle, see-through, translucent colour tints and also for strong, vibrant, solid colours, simply by varying the amount of pigment added to your resin.

These universal epoxy pigments can be used to tint resin river tables and clear castings or add strong, vibrant, opaque colour to resin for projects including resin flow art, counter-tops, decorative flooring, wood inlays, castings and more.

A translucent colour tint can be achieved by adding just a drop or two into your resin mix. For solid colours, simply add more pigment until the desired opacity is achieved. See the table below for a guide to pigment levels for different colours.

Super Concentrated

CULR pigments are one of the most concentrated resin pigments you can buy and the advanced liquid formula ensures that these intense pigments disperse in seconds.

For solid colours, up to 5kg (5 litres) of epoxy resin can be coloured using a single 20ml bottle of CULR pigment.

For a translucent colour tint, much less pigment is required. A single 20ml bottle is enough to produce a see-through colour tint in more than 50kgs of resin!

The exact amount of pigment needed varies from colour to colour and intensity required. This Polished Gold pigment but will typically use between 0.1% (for a translucent appearance) and 1% (for a solid, opaque colour).

Pigmenting for Primer Coats

When using CULR pigments to create a highly opaque ‘primer coat’ in projects such as resin countertops, a very high pigment ratio of 10% should be used. Such a high ratio will ensure the very strong, opaque colour necessary to block-out existing countertops or textures of wood substrates below.

The ratio of 10% pigment to resin is especially important if using light colours like Super White or metallic CULR pigments.

We have not tested blending the CULR pigments with other pigment brands and types and although in many cases it may work, we would recommend testing specifically to ensure there is not a compatibility issue with another brand of pigment.

How to Use

CULR™ pigments are super-easy to use; just drip the desired amount of any colour into either mixed resin and hardener or into just the resin side only (if you want to pigment the resin in advance of using it).

Depending on the strength of the colour required you'll typically need between 0.1% and 1% of pigment. The tables below provide an easy reference as to how much pigment to add or simply keep adding drops until you get the desired colour strength. Remember that CULR pigments are super-concentrated and so you only need a tiny amount to achieve stunning, vivid colours.

Polished Gold Pigment Ratio Guide

Compatibility

CULR pigments are designed specifically for use with clear epoxy resins. They have been thoroughly tested with the GlassCast range of casting and coating resins but should also work with most other clear epoxy systems, although we always recommend conducting a test first.

CULR pigments are not suitable for use with alternative resin types such as polyurethane.