Need any help or advice?
+44 (0)1782 454499
Downloads (1)
 | Technical DataSheet (TDS) |  139 KB |
Specification
Weight and Dimensions
| Length | 1000 | mm |
|---|---|---|
| Wall Thickness | 1 | mm |
| ID Tolerance (mm) | 0.25 | mm |
| OD Tolerance (mm) | 0.25 | mm |
| Weight per metre | 80 | g |
Product Data
| Colour | Black | |
|---|---|---|
| Resin Matrix | Epoxy | |
| Construction | Pultrusion | |
| Appearance | UD (Matt) | |
| Tg Onset (DMA) | 80 | °C |
Fabric Specification
| Fibre Orientation | Unidirectional |
|---|
Mechanical Properties
| Tensile Strength (Lengthways) | 400 - 500 | MPa |
|---|---|---|
| Tensile Modulus (lengthways) | 28-40 | GPa |
General Properties
| Gross Weight | 0.08 | kg |
|---|
Shipping Information
Restrictions
This product is not classed as dangerous goods for transport and can be shipped to all destinations without restriction.
Package Size
There are no package size restrictions or surcharges for this product.
Delivery Cost
To find the delivery cost of this item to your address, add it to your basket and then use the instant shipping calculator on the basket page.
16mm (14mm) Pultruded Carbon Fibre Hexagon Tube
- CFPHEX-16-14-1
- No reviews
High strength pultruded carbon fibre Hexagon tube with a 16mm OD and 14mm ID (1mm wall thickness). This precision made carbon fibre heaxgon tube is suitable for a wide range of applications including radio controlled models, electronics, robotics and similar. The tube is manufactured to tight tolerances using high strength carbon fibre and an epoxy resin matrix for maximum performance.
Available in 1m and 2m lengths.
PRODUCT VERSIONS
Length
AVAILABILITY:20 in stock available for immediate shipping
Trade discounts
| 0-4 | 5-19 | 20+ |
|---|---|---|
| €25.85 | €22.20 | €18.45 |
We won’t be beaten on price!
If you believe you’re buying an equivalent product cheaper elsewhere, contact us to discuss your requirements.
Pultruded carbon fibre hexagon tube manufactured from 100% unidirectional carbon fibre.
The tube has an outer diameter (OD) of 16mm and a wall thickness of 1mm leaving an inner diameter (ID) of 14mm.
Typical Uses
This 1mm thick medium diameter 16mm hexagon section is ideally suited for use in radio controlled (RC) aircraft, helicopters, U.A.V's and other models but would be equally suited to other precision applications like robotics and automation.
Pultrusion Explained
Pultruded hexagon tubes, although less commonly used compared to round carbon fibre tubes, are still very strong and with the hexagon of flat sides, can be uniquely suited to applications where other components are to be attached during assembly. The flat sides provide a convenient surface for mounting other parts, be it bonded into place using a structural adhesive or fixed by other means. Pultrusion is a method of manufacturing continuous lengths of fibre reinforced section (in this case Hexagon shape tube) by pulling continuous strands of carbon fibre through resin and a former before curing the resin all in one process.
Pultruded hexagon tubes feature 100% longitudinal fibre orientation which gives them excellent strength along their length but does make them vulnerable to crushing forces. For applications where none-uniform forces are likely to be encountered, including crushing forces, roll wrapped carbon fibre tubes should be considered as an alternative.
How to Buy
Our pultruded hexagon tubes are available in a 1m or 2m length. Please choose the length you require from the drop-down list.
Discounts are available for larger quantities and wholesale/trade purchases; please contact us for details.
Further Information
How to Cut and Shape
This carbon fibre tube can easily be cut and finished using simple workshop tools like a hacksaw and some wet-and-dry paper. Cutting and finishing a carbon fibre tube can also be perfectly safe if you follow some basic safety precautions.
For a comprehensive guide to both safety advice and cutting and finishing techniques watch our video guide to cutting and shaping carbon fibre sheet and carbon fibre parts.
Trade discounts
| 0-4 | 5-19 | 20+ |
|---|---|---|
| €25.85 | €22.20 | €18.45 |
We won’t be beaten on price!
If you believe you’re buying an equivalent product cheaper elsewhere, contact us to discuss your requirements.
Pultruded carbon fibre hexagon tube manufactured from 100% unidirectional carbon fibre.
The tube has an outer diameter (OD) of 16mm and a wall thickness of 1mm leaving an inner diameter (ID) of 14mm.
Typical Uses
This 1mm thick medium diameter 16mm hexagon section is ideally suited for use in radio controlled (RC) aircraft, helicopters, U.A.V's and other models but would be equally suited to other precision applications like robotics and automation.
Pultrusion Explained
Pultruded hexagon tubes, although less commonly used compared to round carbon fibre tubes, are still very strong and with the hexagon of flat sides, can be uniquely suited to applications where other components are to be attached during assembly. The flat sides provide a convenient surface for mounting other parts, be it bonded into place using a structural adhesive or fixed by other means. Pultrusion is a method of manufacturing continuous lengths of fibre reinforced section (in this case Hexagon shape tube) by pulling continuous strands of carbon fibre through resin and a former before curing the resin all in one process.
Pultruded hexagon tubes feature 100% longitudinal fibre orientation which gives them excellent strength along their length but does make them vulnerable to crushing forces. For applications where none-uniform forces are likely to be encountered, including crushing forces, roll wrapped carbon fibre tubes should be considered as an alternative.
How to Buy
Our pultruded hexagon tubes are available in a 1m or 2m length. Please choose the length you require from the drop-down list.
Discounts are available for larger quantities and wholesale/trade purchases; please contact us for details.
Further Information
How to Cut and Shape
This carbon fibre tube can easily be cut and finished using simple workshop tools like a hacksaw and some wet-and-dry paper. Cutting and finishing a carbon fibre tube can also be perfectly safe if you follow some basic safety precautions.
For a comprehensive guide to both safety advice and cutting and finishing techniques watch our video guide to cutting and shaping carbon fibre sheet and carbon fibre parts.
Downloads (1)
| Technical DataSheet (TDS) | 139 KB |
Specification
Weight and Dimensions
| Length | 1000 | mm |
|---|---|---|
| Wall Thickness | 1 | mm |
| ID Tolerance (mm) | 0.25 | mm |
| OD Tolerance (mm) | 0.25 | mm |
| Weight per metre | 80 | g |
Product Data
| Colour | Black | |
|---|---|---|
| Resin Matrix | Epoxy | |
| Construction | Pultrusion | |
| Appearance | UD (Matt) | |
| Tg Onset (DMA) | 80 | °C |
Fabric Specification
| Fibre Orientation | Unidirectional |
|---|
Mechanical Properties
| Tensile Strength (Lengthways) | 400 - 500 | MPa |
|---|---|---|
| Tensile Modulus (lengthways) | 28-40 | GPa |
General Properties
| Gross Weight | 0.08 | kg |
|---|
Generally, the pultrusions are used ‘as-is’ and don’t require painting. If you really do need/want to paint the pultrusions then a light key with a fine abrasive paper like a 1200 grit wet and dry paper and a thorough degrease and clean using mild detergent or an alcohol wipe should be all that is needed to prepare the surface for paint.
No these pultrusions are not magnetic.
No, this pultrusion is manufactured from standard modulus fibres.
We do not currently offer a custom cutting service for our tubes and pultrusions. However, they are able to be cut DIY relatively easily as you can see from our tutorial video: How to Cut Carbon Fibre Sheet, Tube and Parts
Unfortunately it is not possible to cut a usable thread into carbon fibre composites. The nature of the material is such that the teeth on a thread would not be able to take any load and would break up either during thread turning or the first attempt at using the thread.
Where it is desirable to have a threaded method of attaching the tube or rod, it is commonplace to fabricate and then bond an aluminium insert into the tube or over the rod end which can then have a thread cut into it.
In simple terms these carbon rods would work with linear bearings in that fashion. The only concern is long term durability as the carbon surface is not quite as hard as aluminium and thus would likely wear quicker in many circumstances. For low usage or low load situations this may well not be a limiting factor.
The HDT of these pultrusions is 80 °C.
Yes absolutely! If done carefully, a hacksaw can be used to cut a pultrusion. Take a look at this VIDEO where we show various methods of cutting carbon fibre.
Many people prefer the natural finish of these carbon products, however if you wish to paint them for your specific application then you can do so. A light key with a fine abrasive paper like a 1200 grit wet and dry paper and a thorough degrease and clean using mild detergent or an alcohol wipe should be all that is needed to prepare the surface for paint.
The 16mm outer dimension is measured across two flat faces.
ASK YOUR OWN QUESTION
Customer Product Reviews for 16mm (14mm) Pultruded Carbon Fibre Hexagon Tube
SUBMIT YOUR OWN PRODUCT REVIEW
We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.SUBMIT YOUR OWN PRODUCT REVIEW
We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.Shipping Information
Restrictions
This product is not classed as dangerous goods for transport and can be shipped to all destinations without restriction.
Package Size
There are no package size restrictions or surcharges for this product.
Delivery Cost
To find the delivery cost of this item to your address, add it to your basket and then use the instant shipping calculator on the basket page.
100% SECURE
PAYMENT METHODS
Easy Composites EU B.V., registered in the Netherlands 73601195. All content copyright (C) Easy Composites Ltd, 2024. All rights reserved.